Outrun Conversion Issue

MattGnSC

Member
Joined
Jul 6, 2012
Messages
414
Reaction score
3
Location
South Carolina
So im moving the guts of my Turbo Outrun into my mini outrun cabinet and i cant seem to get the Turbo button to work. The Start button works fine and the button flashes when turbo is available but i cant activate it. The turbo button worked fine in the other cabinet but now nothing. Ive even swapped the start buttons and that doesnt fix it. I know there are dip switch settings to make the start button the turbo button but that option isnt available on mine. I assume this was a cockpit board but like i said it was working fine in the other cabinet. Could there be a jumper somewhere in the other cabinet that im not seeing? Its late and ive run out of things to try.

Any help would be greatly appreciated.

Matt
 
Thanks for the info. I ended up swapping the outrun chips from my non working outrun board with the chips from my working turbo board. Now i have a fully working outrun! No turbo button needed.
 
Back
Top Bottom