coinopdirect
Member
OT: FS: Jensen Tool Bags & small Jensen / xcelite tool lot
Cleaning out one of my closets and need to get rid of a couple of my old tool bags and some duplicate tools.
Seeing if anyone here wants them before I try feebay. Prices include shipping (Dimensional Weight on the tool bags).
All are used and in good condition unless otherwise noted. May need cleaning.
Items can be researched on Stanley Supply Services (they bought Jensen / Contact East).
I have owned these since new / purchased from Contact East. I think the prices are fair but you can shoot me an offer.
Tool Bag # 1 (NOTE: The useless clip board is not included) Some minor scuffs - needs cleaning.
Jensen model # 191-139
http://www.stanleysupplyservices.com/product-detail.aspx?pn=191-139
$60.00 Shipped.
Tool Bag # 2 Some minor scuffs - needs cleaning. ****(SOLD)****
Jensen model # 191-177
http://www.stanleysupplyservices.com/product-detail.aspx?pn=191-177
$40.00 Shipped.
Small Tool Lot - $45.00 Shipped. ****(SOLD)****
Tools included:
QTY Part # Description
(1) 45B090 Jensen Stripper
(1) 79-050 Jensen 9pc hex set (was 10 pc, but 1 is missing)
(2) 191-213 Jensen T-15 Torx Driver
(2) 191-215 Jensen T-20 Torx Driver
(2) 191-197 Jensen T-10 Torx Driver
(2) 43-303 Jensen Phone line tester
(1) 150-077 xcelite 100-S Stripper
(1) 80-521 Jensen Crimper
(1) 118-938 OK Industries EX1 Dip Extractor (8-24 pin)
(1) 320-175 Jensen Serrated Blade Strip Scissors
(1) 446-525 Jensen Straight Forcep 5.5"
(2) 115-488 Ulman DE-s Double-End screw Starter
(1) 185-033 Jensen Slotted Ratchet Driver
(1) 185-035 Jensen Slotted / Phillips Rachet Driver
(1) 14-409 Jensen Feeler Gauge
(2) 36-910 xcelite 5/16" Nut Driver Blade (Hollow Shaft)
(3) 36-908 xcelite 1/4" Nut driver Blade (Hollow Shaft)
(3) 36-906 xcelite 3/16" Nut Driver Blade (Hollow Shaft)
(1) 36-911 xcelite 11/32" Nut Driver Blade (Hollow Shaft)
(1) 36-909 xcelite 9/32" Nut Driver Blade (Hollow Shaft)
(1) 36-907 xcelite 7/32" Nut Driver Blade (Hollow Shaft)
(1) 36-018 xcelite 1/8" Slot Blade
(1) 115-460 xcelite 3/16" Slot Blade
(1) 36-821 xcelite #1 Phillips Blade (tip is slightly stripped)
(1) 36-820 xcelite #0 Phillips Blade
(2) 36-924 xcelite 1/8" Hex Blade
(2) 36-923 xcelite 3/32" Hex Blade
(2) 36-997 xcelite 7/64" Hex Blade
(2) 36-921 xcelite 1/6" Hex Blade
(1) 36-920 xcelite 0.50" Hex Blade
(2) 36-922 xcelite 5/64" Hex Blade
(1) 115-457 Xcelite Blade T-Handle
(1) 446-453 Aven Alignment Tool 13530
(1) 97-621 Jonard spudger Point / Flat AT-3112
(1) 1AC-A Fluke 90-600V No Contact Voltage Detector (requires2 AAA Batteries, not included)
Cleaning out one of my closets and need to get rid of a couple of my old tool bags and some duplicate tools.
Seeing if anyone here wants them before I try feebay. Prices include shipping (Dimensional Weight on the tool bags).
All are used and in good condition unless otherwise noted. May need cleaning.
Items can be researched on Stanley Supply Services (they bought Jensen / Contact East).
I have owned these since new / purchased from Contact East. I think the prices are fair but you can shoot me an offer.
Tool Bag # 1 (NOTE: The useless clip board is not included) Some minor scuffs - needs cleaning.
Jensen model # 191-139
http://www.stanleysupplyservices.com/product-detail.aspx?pn=191-139
$60.00 Shipped.
Tool Bag # 2 Some minor scuffs - needs cleaning. ****(SOLD)****
Jensen model # 191-177
http://www.stanleysupplyservices.com/product-detail.aspx?pn=191-177
$40.00 Shipped.
Small Tool Lot - $45.00 Shipped. ****(SOLD)****
Tools included:
QTY Part # Description
(1) 45B090 Jensen Stripper
(1) 79-050 Jensen 9pc hex set (was 10 pc, but 1 is missing)
(2) 191-213 Jensen T-15 Torx Driver
(2) 191-215 Jensen T-20 Torx Driver
(2) 191-197 Jensen T-10 Torx Driver
(2) 43-303 Jensen Phone line tester
(1) 150-077 xcelite 100-S Stripper
(1) 80-521 Jensen Crimper
(1) 118-938 OK Industries EX1 Dip Extractor (8-24 pin)
(1) 320-175 Jensen Serrated Blade Strip Scissors
(1) 446-525 Jensen Straight Forcep 5.5"
(2) 115-488 Ulman DE-s Double-End screw Starter
(1) 185-033 Jensen Slotted Ratchet Driver
(1) 185-035 Jensen Slotted / Phillips Rachet Driver
(1) 14-409 Jensen Feeler Gauge
(2) 36-910 xcelite 5/16" Nut Driver Blade (Hollow Shaft)
(3) 36-908 xcelite 1/4" Nut driver Blade (Hollow Shaft)
(3) 36-906 xcelite 3/16" Nut Driver Blade (Hollow Shaft)
(1) 36-911 xcelite 11/32" Nut Driver Blade (Hollow Shaft)
(1) 36-909 xcelite 9/32" Nut Driver Blade (Hollow Shaft)
(1) 36-907 xcelite 7/32" Nut Driver Blade (Hollow Shaft)
(1) 36-018 xcelite 1/8" Slot Blade
(1) 115-460 xcelite 3/16" Slot Blade
(1) 36-821 xcelite #1 Phillips Blade (tip is slightly stripped)
(1) 36-820 xcelite #0 Phillips Blade
(2) 36-924 xcelite 1/8" Hex Blade
(2) 36-923 xcelite 3/32" Hex Blade
(2) 36-997 xcelite 7/64" Hex Blade
(2) 36-921 xcelite 1/6" Hex Blade
(1) 36-920 xcelite 0.50" Hex Blade
(2) 36-922 xcelite 5/64" Hex Blade
(1) 115-457 Xcelite Blade T-Handle
(1) 446-453 Aven Alignment Tool 13530
(1) 97-621 Jonard spudger Point / Flat AT-3112
(1) 1AC-A Fluke 90-600V No Contact Voltage Detector (requires2 AAA Batteries, not included)
Attachments
Last edited: