Oscillating crystal replacemnet question

dyno

Well-known member
Joined
Apr 11, 2009
Messages
1,644
Reaction score
81
Location
Lower Mainland, Britsh Columbia
Working on a pcb and I am not getting any pulses with my logic probe on any of the ICs so I am thinking the oscillating crytal is packed it in. My question is the crystal on the pcb right now is 12.096mhz and I have a 12 mhz crystal, can I replace the 12.096 mhz with the 12 mhz? Will it make any difference since they are so close in frequency?
 
Working on a pcb and I am not getting any pulses with my logic probe on any of the ICs so I am thinking the oscillating crytal is packed it in. My question is the crystal on the pcb right now is 12.096mhz and I have a 12 mhz crystal, can I replace the 12.096 mhz with the 12 mhz? Will it make any difference since they are so close in frequency?

It won't make any appreciable difference in game play, you won't notice, but trolls on KLOV will call your repairs 'hacks' if you do :)
 
Back
Top Bottom