orion monitor issue

kjoel

New member
Joined
Jun 19, 2006
Messages
3,683
Reaction score
5
Location
bayshore, New York
19" orion monitor with a kortek KI-2-VO chassis. So this unit was plugged in without an isolation transformer hence now its dead. I installed a new flyback and full cap out and hot and its still dead. Fuses are good. Seems to be getting voltage but not to the flyback. Anyone know the common resistors/ other parts that will need to be checked and replaced. Flow chart would be great

thanks guys
 
Last edited:
Back
Top Bottom