Optical boards for Centipede Cabaret Trackball

Robotron Jon

Well-known member
Joined
Feb 10, 2008
Messages
10,647
Reaction score
164
Location
California
I think one of my optical boards are bad on my cabaret Centipede. Does anyone still sell these?

The control would not go up or down but did work side to side. I swapped the boards and now it goes up and down but not side to side. I looked at the board and the solder looked fine.
 
Does yours have the 'happ' style/Atari style still in it (you can tell because you can see the boards from outside, it's not completely enclosed) . I would try to just get a used trackball and grab the board off of it, it would probably be cheaper that way too.
 
Back
Top Bottom