only 1 speaker on

Matt N

New member
Joined
Oct 5, 2010
Messages
10
Reaction score
0
Location
middle river, Maryland
working with a letheal enforcers game sound had went out so i replaced to board,sound is working fine now but i only the right speaker is on,this was also the case with the old board (sound would work for a few minutes then go out) i checked the wiring all looks ok. is there a chance it could just be a bad speaker or is there something else i should check for?
 
I'd verify that the dip switch is set to Stereo, not Mono. According to the manual, there's a 4 switch DIP switch at Q1. Make sure SW1 is off for Stereo.

DogP
 
check for stereo

i checked the switch it was set to stereo & just to make sure i brought up the menu & it did say under sound "stereo" any other ideas?
 
LE 1 boards have a hybrid audio chip that suffers from leaking capacitors.

When the audio dies the hybrid isn't far from being unrepairable. It all depends on how far the electrolyte damage from the leaking caps has spread across the module.

RJ

PS: Sorry, but I don't repair hybrid module issues. It just takes too dang much time and the results aren't always good.
 
Back
Top Bottom