Omega Race Issues

Arcade1VA

Well-known member
Joined
Apr 20, 2008
Messages
1,788
Reaction score
164
Location
Illinois
I am having issues with my Omega Race board set.....it worked great for the longest time with no issues at all, and now all of the sudden when I went to fire it up the other day, all I got on the screen was a diagonal line that blinks in and out as it moves from the bottom right to the top left (see attached pic). The spot killer on the monitor deflection board blinks on and off with the pulses of the line. All of the lights (including start buttons) work fine, and I have a strong +5v, +8v and +18v going to the board plugs. I am guessing there is an issue with the main logic board, as when I hit a start button, the line disappears, and when I actuate the coin switch it emits a beeping noise, but still only a line on the screen. The game will not enter test mode either. Has anyone ever seen this happen with one of these? This board had very little acid damage to it, and was never an issue. I would appreciate any insight into this as I may have a potential buyer for this, so I'd like to get it up and going again. Thanks.
 

Attachments

  • 005.JPG
    005.JPG
    34 KB · Views: 17
Back
Top Bottom