Branden Member Donor 2013 VAPS Joined Dec 7, 2011 Messages 361 Reaction score 3 Location Vancouver, Washington Jan 15, 2018 #1 So the connector on my harness that plugs into the motherboard is pretty corroded. Are there replacements for these available?
So the connector on my harness that plugs into the motherboard is pretty corroded. Are there replacements for these available?
mattosborn Well-known member VAPS Joined Aug 19, 2008 Messages 6,688 Reaction score 2,756 Location Derry, New Hampshire Jan 15, 2018 #2 That style connector sucks. Replace it with a standard edge connector.
VectorCollector Well-known member Donor 13 years: 2013-2025 VAPS Joined Mar 16, 2013 Messages 31,610 Reaction score 19,819 Location Kanata, Ontario Jan 15, 2018 #3 An 18/36 edge connector will do the job. Do it right and heatshrink the solder-tails too. EXAMPLE: (can find many places/vendors) https://www.twistywristarcade.com/edge-connectors/450-18-36-pin-edge-connector-sec.html Last edited: Jan 15, 2018
An 18/36 edge connector will do the job. Do it right and heatshrink the solder-tails too. EXAMPLE: (can find many places/vendors) https://www.twistywristarcade.com/edge-connectors/450-18-36-pin-edge-connector-sec.html
security0001 Well-known member Donor 6 years: 2020-2025 Joined Jan 10, 2011 Messages 9,349 Reaction score 2,812 Location Montana Jan 15, 2018 #4 mattosborn said: That style connector sucks. Replace it with a standard edge connector. Click to expand... for sure they are horrible connectors, so edge connector all the way.
mattosborn said: That style connector sucks. Replace it with a standard edge connector. Click to expand... for sure they are horrible connectors, so edge connector all the way.
VectorCollector Well-known member Donor 13 years: 2013-2025 VAPS Joined Mar 16, 2013 Messages 31,610 Reaction score 19,819 Location Kanata, Ontario Jan 15, 2018 #5 Pinout reference: J7 18 Position THIS IS THE CARD EDGE CONNECTOR 1-=20 7- KEY 8- Y OUT 9- X OUT 10- (To Logic Board J1 Pin 19 ~ Ground for Cocktail?) 11- Z OUT 12- 13- 14- 15- Z GND 16- X GND 17- Y GND 18- https://www.arcade-museum.com/pinouts-game/8920.html
Pinout reference: J7 18 Position THIS IS THE CARD EDGE CONNECTOR 1-=20 7- KEY 8- Y OUT 9- X OUT 10- (To Logic Board J1 Pin 19 ~ Ground for Cocktail?) 11- Z OUT 12- 13- 14- 15- Z GND 16- X GND 17- Y GND 18- https://www.arcade-museum.com/pinouts-game/8920.html
OP OP Branden Member Donor 2013 VAPS Joined Dec 7, 2011 Messages 361 Reaction score 3 Location Vancouver, Washington Jan 15, 2018 #6 Thanks guys! I will get one ordered.