Older Coin Door Parts

ManiN

Member
Joined
Jul 31, 2009
Messages
727
Reaction score
7
Location
Washougal, Washington
I am in search of coin door parts for older Midway machines like pacman, galaga, etc...

The following pic shows the part highlighted I'm after. The door I have uses the cast style, and I have seen both stamped and cast. I cannot seem to find any vendors online for parts new or used. Does anyone know of a good place to look?
 

Attachments

  • Coin_Door.jpg
    Coin_Door.jpg
    7.4 KB · Views: 69
Please note that the restoration forum is meant for threads detailing restorations (with lots of before, during and after pictures). You've got a few posts out here that really belong in other forums. This one for example would work better in the Wanted forum.
 
Please note that the restoration forum is meant for threads detailing restorations (with lots of before, during and after pictures). You've got a few posts out here that really belong in other forums. This one for example would work better in the Wanted forum.

That does make sense, and I know that had been discussed, but didn't realize guidlines were finalized and posted.
 
I agree that proper posting should be done, but to be honest, my original posting thoughts were that I am restoring this cabinet, and parts are missing, so for a restoration of an old piece of equipment, I reached out for leads on parts. I had no problems, just missing parts, and it's a little specific for general, so that lead me to what the topic is, restoration. I appreciated 720's link to the very component I was after.
 
Last edited:
Back
Top Bottom