OK to swap TRON and Pac-Man Monitors?

benkeezer

Member
Joined
Jun 28, 2009
Messages
426
Reaction score
3
Location
Delmar, New York
TRON has G07-CBO and Pac-Man has a WG K4600. The TRON does not fully work but the monitor has no burn and looks like new. Pac-Man probably needs a cap kit (I have one but am still learning to solder). Is it okay to swap them? Thanks
 
It's pretty easy since they mount in the cabs exactly the same way. Just pull the entire assembly out of one and stick it in the other...
 
I actually have a ms pac monoitor in my tron cabaret and it has ms pac burn- drives me crazy. It is scheduled to be replaced in the very near future
 
I will also be making this exact same swap, i have a spare g-07 from a parts lot i bought,..... thanks for the info!
 
TRON has G07-CBO and Pac-Man has a WG K4600. The TRON does not fully work but the monitor has no burn and looks like new. Pac-Man probably needs a cap kit (I have one but am still learning to solder). Is it okay to swap them? Thanks

Did they put G07's in Tron from the factory?

I have a Tron cab that has never had CRT service since new and it shipped with the WG K4600. Yes the CRT is still on its original set of caps. How the hell it is still putting out a solid image i'm not sure but I refuse to mess with it until it has a problem. lol.

Cool to know that they can be swapped. :)
 
Did they put G07's in Tron from the factory?

I have a Tron cab that has never had CRT service since new and it shipped with the WG K4600. Yes the CRT is still on its original set of caps. How the hell it is still putting out a solid image i'm not sure but I refuse to mess with it until it has a problem. lol.

Cool to know that they can be swapped. :)

The original monitor in mine was a 4900. I guess that just put whatever that had laying around into them.
 
Back
Top Bottom