ok..Gorgar settings..I don't understand something here

[Smart Bomb]

ok..Gorgar settings..I don't understand something here

I am going thru the settings on my Gorgar pin....and after u set everything you want I am to turn the game off then back on again..well I do that and it keeps starting up to settings display and wont get off it...i just turned the game off and on 15 times and everytime it comes on with settings display...

ALSO....when it was playing it was only playing two balls...its is set to three but after two the game ends....

ALSO...sometimes when i press the flipper, i get 100 points by simply hitting the flipper,,,that can't be right can it??

I will point out, it had batteries in it but i removed them because of the horror stories i hear about leaky batteries....nw i HAVE gone thru the settings before without the batteries installed and got right back to game play after turning off and on....but NOW it wont get off settings display at all!

I am about to put them back in thinking the batteries have something to do with some of these issues...but for now i wanted to throw these issues out here for suggestions of what MAY be the problem if not the batteries.

 

[LyonsArcade]

The game needs the batteries to boot up, or it'll come up into settings mode. The reason it booted after you took the batteries out is because you went all the way through the mode, you can turn it on, then off and back on really quick and it'll boot too.

Put new batteries in it and turn it on twice and it'll be working fine.

The flipper thing is because you have a switch adjusted too close, so when the flipper fires it's making the switch bounce slightly and it touches together and gives you the points. It's probably one of the switches right by the flipper.

The three ball thing may be because of the batteries, not sure that's a weird one.

 

[Smart Bomb]

The game needs the batteries to boot up, or it'll come up into settings mode. The reason it booted after you took the batteries out is because you went all the way through the mode, you can turn it on, then off and back on really quick and it'll boot too.

Put new batteries in it and turn it on twice and it'll be working fine.

The flipper thing is because you have a switch adjusted too close, so when the flipper fires it's making the switch bounce slightly and it touches together and gives you the points. It's probably one of the switches right by the flipper.

The three ball thing may be because of the batteries, not sure that's a weird one.

batteries back in and booted up fine.....and i went to settings 30 which is the ball setting...made sure it was on 3.....played a game and i get 3 balls now.

and i had to re-adjust a the flippers and i may have corrected that 100 point issue int he process..it is not doing it anymore..for now anyway.