OffRoad Thunder Steering Issues

skennytee

Member
Joined
Jan 27, 2015
Messages
125
Reaction score
3
Location
Tennessee
Off Road Thunder Steering Issues

Continues to blow fuses on the force feedback board and i struggle to get a proper calibration

Any ideas where to start

If i put a new fuse in i can feel the feedback then the pop, i also lose the ability to turn left or right

Very frustrating
 
Have you tried replacing the force feedback board? I may have an extra I can sell you if you don't have a second machine to test from.
 
I ended up replacing the Magicbus I/O board. You can find them on eBay for about $80. If you have LCD monitor, you can use the Arctic Thunder board too. They don't have vga connectors, as you can plug your vga monitor directly into the graphics card. It's not out of the question that it's a steering board problem, but likely culprit is a bad trace on the Magicbus card.
 
Back
Top Bottom