Off Road Thunder Magic Bus Board problem

twinmice1

Member
Joined
Apr 11, 2009
Messages
64
Reaction score
0
Location
Canyon Country, California
I just got a standard Offroad Thunder sit-down. None of the buttons were working so i tracked the problem down to the Magic Bus board. Everything on the board indicates good, except the Security and Magic Bus Reset leds. They are both on and not blinking like they are supposed to? Any ideas why those would be not working? Thanks Mike
 
Make sure your Serial Cable is good, then be sure it is on com1 of the PC.

If it still does not work, you will have to start with adding a video card to the PC go into the Bios and see if the COM port is set properly. If it is, and all of the other things I mentioned are good, you could have a faulty I/O board.
 
Back
Top Bottom