Off Road Challenge linking question

Andy63

New member
Joined
Jan 11, 2010
Messages
60
Reaction score
1
Location
Maryland
Trying to get 2 off road challenge board sets to link.
They see each other but both link as player one regardless if switches are master or slave.
One is version 1.30 the other is version 1.50
I only have a manual for crusin usa. Am i missing some switch settings? Do they both need to be the same version? Manual info or link would be helpful.

Thank You
Andy
 
It's been a while since I've worked on these...
Are you using the hard dips or program dips
Tried a diff linking cable of diff cable location
Switched machine A from master to slave and vice versa on B
Is there a jumper wire near the link cable that also needs to identify slave/master

Good luck. If you still need a manual I can get one. PM me
 
Back
Top Bottom