odd k7000 issue

cadillacman

Well-known member
Joined
Nov 25, 2007
Messages
15,504
Reaction score
542
Location
Roscoe, Illinois
hey guys heres a odd one for ya,..


i have a wels 25" k7000 monitor that the previous owner ran WITHOUT the tube ground hooked up after another klover rebuilt it.. the iso is bad (no output) so testing was done with a tester iso setup that i have.



its working and making picture but the pic has a very hard time syncing and the pic is also crooked and about 1/2 off the screen. header pins solder checks ok.,


im thinking no tube ground caused the chassis to try to get ground somewhere else if that mazkes sense...

i did hook this game up to ao 19" k7000 and the game outputs good video , pic was with with the 19" so this is definately a monitor issue...


where should i start checking? This is a new one to me. mabye i should just find another repairable chassis and scrap this one... it may be over my head.
 
it was the vert horiz ic, ic2..

replaced it and all is well..

musta got zapped while trying to arc a new ground lol...

thanks ken!!!!!!
 
Back
Top Bottom