DPtwiz
Well-known member
- Joined
- Nov 2, 2006
- Messages
- 8,099
- Reaction score
- 621
I'm just starting out on reproduction pinball cabinets. I don't have near as big a list as i do in arcade cabinets, it will take some time to build it up. I do have some good ones though.
WPC 95 cabs, Kiss, Flash Gordon, Firepower, and big guns. i'm still learning what cabinets are the same for which titles, and i have some great help from a forum member here who is extremely well versed in pins. I plan on doing these in a few levels. Bare wood, painted, painted/stenciled, and also the options of blind nuts, vents, braided ground strapping, and whatever else i can think of.
I have the base price for bare wood figured out. Jpopson will be the one doing the painting, painting/stenciling, and also silkscreening the warning on the back of the wpc 95 cabinet heads. Bare wood price, 750.00 I am using a domestic birch, that has no eyes/voids, made from approximately 6 layers. This stuff is light years ahead of the chinese birch i had been using for everything previously. I had to step up the quality, to make these as exact to the originals as possible. John is supposed to let me know on the price to paint them. The transactions will be handled seperately, pay me for the cab, him for the paint.
I've invested 1600.00 in a professional router table to do the lock miter joints in the cabinet corners, 1600.00 in a 220V 84" table saw, and another 350.00 in precision corner clamps, i want these to be as perfect as i can make them. Here's some pics of what i have sitting in my back room right now.
Pm me with any questions, thanks!
WPC 95 cabs, Kiss, Flash Gordon, Firepower, and big guns. i'm still learning what cabinets are the same for which titles, and i have some great help from a forum member here who is extremely well versed in pins. I plan on doing these in a few levels. Bare wood, painted, painted/stenciled, and also the options of blind nuts, vents, braided ground strapping, and whatever else i can think of.
I have the base price for bare wood figured out. Jpopson will be the one doing the painting, painting/stenciling, and also silkscreening the warning on the back of the wpc 95 cabinet heads. Bare wood price, 750.00 I am using a domestic birch, that has no eyes/voids, made from approximately 6 layers. This stuff is light years ahead of the chinese birch i had been using for everything previously. I had to step up the quality, to make these as exact to the originals as possible. John is supposed to let me know on the price to paint them. The transactions will be handled seperately, pay me for the cab, him for the paint.
I've invested 1600.00 in a professional router table to do the lock miter joints in the cabinet corners, 1600.00 in a 220V 84" table saw, and another 350.00 in precision corner clamps, i want these to be as perfect as i can make them. Here's some pics of what i have sitting in my back room right now.
Pm me with any questions, thanks!
