FS Parts: Now Available! Dedicated Ghouls n Ghosts Dedicated Bezel

Status
Not open for further replies.

fizgig

Permanently Banned for constant cyber bullying. Ge
Joined
Aug 14, 2010
Messages
5,869
Reaction score
61
Location
Murrieta, California
Rating - 100%
58   0   0
Now Available! Dedicated Ghouls n Ghosts Dedicated Bezel

Well, after a crap load of time and effort, i finally finished re-creating the bezel for a dedicated Ghouls n Ghosts. I lost track of how much time i spent cleaning this up. Started with a 600 dpi scan. Old bezel was in very nice shape but still had rips, tears, sun faded or missing colors, tape (tape is really a pain to clean up) dirt, water damage, frayed edges, imperfections in original art and printing process, etc.
Color corrections were an incredible challenge (Rich @ TOG i feel your pain brother) It involves hand selecting particular areas and adjusting everything, brightness, contrast, saturation, levels, etc.

I will print these out very soon, plotter cut on thickest material i can use.
If you want one let me know ASAP.

New:
Picture6.png


Original:
Picture13.png


Before:
Picture8-2.png


After:
Picture9-1.png


Picture8.png
 
Last edited:
Ghouls N Ghosts bezel before pix

Here's a few close-ups of the original:

Tape!!!
Picture8-1.png


After clean up:
Picture9.png


Fade, tape, hurts to look at now
Picture7-1.png


After clean up:
Picture6-2.png
 
Last edited:
I'll take one, what is the original size? Mine will be going in a taito cab (like elevator action, jungle hunt etc...) With a 19" monitor.

Thanks
 
The dedicated ghouls n ghosts bezel is aprox. 23.8" tall by 23.8" wide.

You probably need the conversion size.

I think Taito's are: 21" tall by 22 "wide.



I'll take one, what is the original size? Mine will be going in a taito cab (like elevator action, jungle hunt etc...) With a 19" monitor.

Thanks
 
Thanks for reproducing this!
Awesome job!
Incredible work!

I'll take 2 at the original Dynamo Cab size. Just let me know the cost...
Again, great job!

-MUEL
 
The gameongrafix bezel version is not dedicated (conversion/cut off on the bottom) printed directly from a scan off the internet. The quality is actually not too bad but it wasn't cleaned up, just printed as is. If you look closely at the top of the orange trident, there was art missing (white area).


Nice work!
any word on price?

Gameongraphix has this part listed but I wish someone would repro the CPO
http://www.gameongrafix.com/index.php?search[terms]=ghouls&search[mode]=any
 

Attachments

  • Picture 11.jpg
    Picture 11.jpg
    20 KB · Views: 44
Status
Not open for further replies.
Back
Top Bottom