FS Parts: NOS! K7000 A Schematics - Supplement Manual. BLOWOUT $2.75 SHIPPED! Original print!

arcadecup

Well-known member
Joined
Oct 3, 2006
Messages
2,847
Reaction score
231
Rating - 100%
100   0   0
NOS! K7000 A (ZENITH!) Schematics - Supplement Manual. $2.75 SHIPPED! Original print!

UPDATE!:
This is the ZENITH model schematic manual of the k7000.
As far as we all know this was nonexistent until now!.

Nothing better than a tangible copy of schematics while working on a board.
New original wells Gardner print on card stock paper. Printed October of 1990!
Schematics with other notes. 6 pages.

PayPal $2.75 [email protected] or do a self checkout on my website.
click the Boards/Semiconductors/Kits/Misc tab and navigate down to the misc category.

k7000asv.jpg
 
Last edited by a moderator:
Is that for the Zenith made one?

UPDATE!:
This is the ZENITH model schematic manual of the k7000!!


Says on the schematic page:
9K7700
13K7800
19K7600
19K7900

the schematic has some variations from everything i have seen out there. example, first i have seen showing the an5515 for the vert ic! interesting.. rare find!. schematic structure true to the wells k7 family.

it even mentions about how the monitor has a negative video and a composite video NTSC option.

you can actually change a k7000 family monitor to accept negative video color signal by moving the bi-polar capacitors a notch down and if I remember correctly you had to add a jumper. did it once to a plain k7.

an5.jpg
 
Last edited by a moderator:
Wait, did you think I asked if the K7000A was a Zenith made chassis or Sanyo made?

The K7000A's that I know of had the flyback with the extra wire and extra nodule, like this:

flybacko.jpg
 
ZOMG, this is indeed the ZENITH schematic!. didnt exist until tonight lol.
i can see the mounted cap on the cover of the manual :)
thanks for pointing that out. at first i thought it was just the final version (p446b tan board) of the wells gardner k7000.
this is sorta a big deal then!

should be able to figure how to sub in a k7000 flyback perhaps.. but woudl you really want to?
the mounted bleeder cap is in schematic form. entire pinout and drawing of flyback this is great news!

Wait, did you think I asked if the K7000A was a Zenith made chassis or Sanyo made?

The K7000A's that I know of had the flyback with the extra wire and extra nodule, like this:

flybacko.jpg
 
Last edited by a moderator:
ZOMG, this is indeed the ZENITH schematic!. didnt exist until tonight lol.
i can see the mounted cap on the cover of the manual :)
thanks for pointing that out. at first i thought it was just the final version (p446b tan board) of the wells gardner k7000.
this is sorta a big deal then!

should be able to figure how to sub in a k7000 flyback perhaps.. but woudl you really want to?
the mounted bleeder cap is in schematic form. entire pinout and drawing of flyback this is great news!

Well...yeah...that's what I thought... :D

Money sent. I'd say there's enough of these out there that are dead that it might be a good idea to develop a replacement option for a flyback. But only if you have spare time ;)
 
Back
Top Bottom