Noob: What crt/chassic is this?

emubastard01

New member

Donor 2016
Joined
Jul 12, 2016
Messages
176
Reaction score
2
Location
Salt Lake City, Utah
I pulled a crt from my Asteroid Deluxe with hopes to do a cap kit. There was a sticker indicating the tube was a Amperex M50-102W but no sticker I could find anywhere else for the chassis/monitor model. I'm sure this will be obvious to someone...

pics attached.
 

Attachments

  • IMG_1580.jpg
    IMG_1580.jpg
    203.6 KB · Views: 67
  • IMG_1579.jpg
    IMG_1579.jpg
    200.4 KB · Views: 45
  • IMG_1578.jpg
    IMG_1578.jpg
    190.7 KB · Views: 43
  • IMG_1573.jpg
    IMG_1573.jpg
    197.9 KB · Views: 36
  • IMG_1572.jpg
    IMG_1572.jpg
    192.1 KB · Views: 28
Last edited:
i have the cap kits and filter caps in stock for it if you need.
 
If I recall correctly.... the parts from the Electrohome G05-802 and WG 19V2000 are interchangeable... so you'll want to verify your boards are the WG ones, and that some swapping around hasn't been done. I haven't run into any that have had swapping done.... but you'll want to make sure both the deflection and hv haven't had G05-802 bits put in before buying your parts.

I'm not familiar enough with them from memory to be able to verify based on the pictures.
 
G05-802 — HV cage has a grid of holes, with smaller holes in between, deflection heat sinks are thick with "starburst" ends, green/orange PCBs

V2000 — offset round holes in the HV cage cover, flat heat sinks, white PCBs
here is how i tell the difference.
 
Back
Top Bottom