Noob Help: Golden tee, no sound

BBC

New member
Joined
Feb 9, 2011
Messages
107
Reaction score
0
Location
Illinois
Hi, I have a golden tee 97 that works great, but has no sound. I have checked the wires to the speaker, and they are fine. There is a LED on the board that says sound status but it does not light up. Any ideas would be much appreciated!!

I am a pinball guy, but no experience with video games.

Thanks, Brian
 
Check your power supply voltages at the board. I don't know about that system but my boards audio operate from the +12 volt supply. I suspect you will find your voltages are low or not present.
 
Asking the obvious;

- Does your cabinet have an off board volume pot near the coin box?

- Have you played the game or just the attract mode? GT'97 has a no sounds in a attract mode option switch.

I would pop the connector off the board and measure the resistance through the audio loop. If it's low ohms, look at the board, high ohms look at the audio circuit. Also, feed the audio loop an alternate audio source to test it.
 
Hi, thanks for the ideas. I have played a game, but no sound during playeither. I will take a look at the other items mentioned tonight.

Thanks, Brian
 
Back
Top Bottom