non-functioning controls after installing LL adapter and 60-in-1

keithlee

Active member
Joined
Jul 21, 2010
Messages
363
Reaction score
131
Location
oklahoma city, Oklahoma
non-functioning controls after installing LL adapter and 60-in-1

My Ms. Pac-Man was working fine prior to the conversion. 60-in-1 appears to boot ok but I get no response from the joystick or buttons(using player 1 and 2 buttons, jumpers moved as instructed). Any ideas where to start?
Thanks all,
Shawn

p.s.original board and harness looks to have had major hack work done.
 
check to see if the grounds from your control panel are connecting through the adapter to the pcb. I had a problem once where it wasn't...
 
You also can check the setting on the 60-in-1 board to make sure they are for a Upright one player game or cocktail depending on your Ms Pacman. Put the board into test mode using your test button on the cabinet - and check the DIP settings.
 
Please forgive my ignorance! Once I figured out how to get into the service menu and enabled free play the controls worked fine. I am still a bit confused as to why it wouldn't let me navigate outside of free play mode. Oh well.

sorry for the distraction. And thanks again.
Shawn
 
Back
Top Bottom