Nintendo playchoice t molding.

Tball5

Member
Joined
Dec 10, 2016
Messages
158
Reaction score
5
Location
California
I finally found some 11/16" t molding to put on my converted playchoice. I do have one question though. Where does the factory t molding stop on the bottom? Does it go all the way to the back of the cabinet? When I removed the old t molding, it stopped about 3 or 4 inches from the front curve. Any help is greatly appreciated!
 
Here's a link to where I stopped. I got 20 feet of t molding but I didn't measure it before I started putting it on. I feel like it's too short. That's why I was hoping the factory molding stopped after the front curve. https://imgur.com/gallery/9eXlu
 
Both of mine stop at about 13.5 and 9 inches from the front edge, and do not go all the way to the back. One's a plywood Japanese cab(9") and the other is a particle board American cab (13.5"). Honestly, a good 9 inches of moulding should do it.
 
Last edited:
Back
Top Bottom