Nintendo NES Systems! $49.99 90 day warranty

darer234

New member
Joined
May 26, 2010
Messages
69
Reaction score
0
Location
Thibodaux, Louisiana
Rating - 0%
0   0   0
Totally refurbished NES Systems now avaliable!

Includes NES console, controller, a/c adaptor, video cable, and Super Mario Bros/Duck Hunt game.

Nintendo NES SYSTEM with a brand new 72 pin connector. This brand new connector has been installed in this Nintendo NES system, it is the part that reads the actual games. As many of us know of the blinking screens, freezing, garbled graphics and blowing in cartridges to try to get them to work. 20 years of use has been hard on these consoles, but we refubished them to factory working condition and they are working FLAWLESS!!!

OUR SYSTEMS ARE GUARENTEED TO WORK EVERYTIME, THE FIRST TIME. NO BLOWING IN GAMES OR BLINKING SCREENS EVER! GUARENTEED! IF YOUR CONSOLE DOES NOT WORK WE WILL REPLACE IT OR GIVE YOU YOUR MONEY BACK GUARENTEED! 90 DAY WARRANTY PERIOD!

Our systems has been totally refurbished by our most trusted technicains and have been fully tested for hours before being authorized for sale. Our vintage consoles have been checked inside and out to make sure they will work for decades to come! YOU CANNOT GO WRONG WITH OUR GUARNETEED CONSOLES!


pm me or email [email protected]
 
location?

I notice your lacking location.
Able to come and see in person?

Wait mabey not this is you right?
Console Solutions
145 Alice Dr. #7
Thibodaux,LA 70301

and some pics of your rework May catch more interest.
i would be interested in seeing the solder work.
and what type of flux was used during the rework?

its the geek on me which likes details :)

Totally refurbished NES Systems now avaliable!

Includes NES console, controller, a/c adaptor, video cable, and Super Mario Bros/Duck Hunt game.

Nintendo NES SYSTEM with a brand new 72 pin connector. This brand new connector has been installed in this Nintendo NES system, it is the part that reads the actual games. As many of us know of the blinking screens, freezing, garbled graphics and blowing in cartridges to try to get them to work. 20 years of use has been hard on these consoles, but we refubished them to factory working condition and they are working FLAWLESS!!!

OUR SYSTEMS ARE GUARENTEED TO WORK EVERYTIME, THE FIRST TIME. NO BLOWING IN GAMES OR BLINKING SCREENS EVER! GUARENTEED! IF YOUR CONSOLE DOES NOT WORK WE WILL REPLACE IT OR GIVE YOU YOUR MONEY BACK GUARENTEED! 90 DAY WARRANTY PERIOD!

Our systems has been totally refurbished by our most trusted technicains and have been fully tested for hours before being authorized for sale. Our vintage consoles have been checked inside and out to make sure they will work for decades to come! YOU CANNOT GO WRONG WITH OUR GUARNETEED CONSOLES!


pm me or email [email protected]
 
and some pics of your rework May catch more interest.
i would be interested in seeing the solder work.
and what type of flux was used during the rework?

its the geek on me which likes details :)

No soldering needs to be done. To replace the 72 pin you just take it apart, pull it from the motherboard and replace it with a new one.
 
Yes thats me. I got a Ikari Warriors cab fully working too for sale.

ok when you are talking about reworking you mean my NES or my xbox 360 repairs?
 
No soldering needs to be done. To replace the 72 pin you just take it apart, pull it from the motherboard and replace it with a new one.

correct,

but that is only if all the caps are good, traces, cold solder joints or other various problems that occur with the nes or any electronics for that matter.

we test everything to make sure every customer is happy.

i have over 700+ feedback on ebay user: consolesolutions360

also I got sega, game gear, gameboy, pretty much anything vintage. plus do vintage repairs, ps3, xbox and wii.
 
No soldering needs to be done. To replace the 72 pin you just take it apart, pull it from the motherboard and replace it with a new one.

And, hopefully, clean the contacts on the board while you're at it... You'd be amazed how cruddy those tin contacts can get, despite never having been separated from the connector before.

-Ian
 
correct,
but that is only if all the caps are good, traces, cold solder joints or other various problems that occur with the nes or any electronics for that matter.

I think at least 90% of all NES failures are that connector. I've fixed at least a hundred of them, and most times, just cleaning up the board edge and plugging a new connector on is all they need to work electrically. Occasionally you'll have to fix a contact where the tin corroded down to the copper. I've seen a couple with bad switches, cracked solder pads around the modulator, and one with a bad filter cap, but almost all of them just need that connector.

Of course, the real work is getting the outsides of them nice and clean. It's amazing how filthy they can be! Cleaning the machine takes easily longer than slapping a connector in it.

-Ian
 
oh

wow, I thought those were hard board level LOL...
guess I shoulda ripped that mofo apart as a kid and checked it out.
and yea, the xbox ones. what reflow tricks you use?.
Ive heard some of them need just that a reflow to run.

and you have any main boards?.. my friend might be looking for one
He says as of now he got it free but the person who gave it to him needs
a new main board.,

Ill get a 360 eventually, im not rushing and broke lol
No soldering needs to be done. To replace the 72 pin you just take it apart, pull it from the motherboard and replace it with a new one.
 
www.consolesolutions.net/repair_faq.php for all the xbox 360 repair info, what i do, my equipment, etc.

now to the nes systems,

all the consoles have the mainboard connector polished with our own polish blend called Catridge Solution, it is simliar to the Mothers polish.
or any cartridge games that we sell.

Plus the consoles and controller are polished with plastic polish so they shine.

here is a good example of the type of console system you will be getting. a/v cables are sent unless rf converter is requested by customer)
Nintendo_NES.JPG


I also have sega genesis, gameboy, game gears, all totally refurbished and polished(screens and housings), fully tested, and warrantied for 90 days!

PM me if you need anything for vintage consoles, if i dont have it, i will find it. I have been restoring and repairing video games for about 3 years now, its all i do when i am not getting my MBA at night. its how i pay my bills.
I have repaired around 500 xbox 360s and am now moving into the vintage business. i love working with all the older stuff, simplier electronics and gotta love the classics.
 
Last edited:
Back
Top Bottom