Nintendo ISO

FrizzleFried

Well-known member

Donor 2011
Joined
Mar 20, 2007
Messages
54,193
Reaction score
5,245
Location
NAMPA, Idaho
So i pick up a Nintendo ISO so I can run a Sanyo 20EZ in a cab. It comes complete even with the labeled junction box for 90v, 100v, and 120v. The problem is that 90v measures 97.6v, 100v measures 108v and 120v is well, 120v. The Sanyo 20ez has a 10% tolerance evidently, so should I run it at 108v or 97.6v?
 
so it's safe to run it close to 110, just not 120? :) the 90V setting (97V?) is too low for this application yes?

probably explains why my replacement light fixtures work fine with the existing wiring on my Nintendo cabs.
 
Back
Top Bottom