Nintendo Coin Door Bolt size

billybob2236

Active member
Joined
May 15, 2006
Messages
2,492
Reaction score
7
Location
GREEN BAY, Wisconsin
I am looking at ordering 1000, I know these are hard to find state side. What I need to know is the size. I believe they are M5 x 35 MM the size I am looking at ordering, but I need be sure before I drop the cash. I would be selling these for $.50 to $.75 each with nut.

-Jake
 
I have no problem fronting the money, and I can ship you as many as you need to ship out with your repro coin doors. I know that their is a demand, I just want to verify the size. I believe they are M5s and the length should be close. They are 1.3" long, that is long enough to go through the coin door and the cab with enough threads to put the nut on.

-Jake
 
Sounds good. I dont have anyting here to verify sizes with at the moment....sorry no help.
 
Can you get the carraiage bolts for the metal nintendo CPs too? They're impossible to find as well.
 
For the Nintendo coin door i just bought a bunch from twisted quarter. The ones that will work perfectly are 8 - 32 metric,11/4 inch long.

8/32 is not metric. The sizes/bolts you mention may work but they are not the same as the original.
 
Back
Top Bottom