Nintendo cabaret info needed.

bongoben

New member
Joined
Aug 7, 2008
Messages
2,250
Reaction score
7
Location
Wisconsin
Hey... can anybody supply me with the dimensions and angles of the side of a Nintendo cabaret / mini cabinet? I've got a new project in mind for this spring/summer and this would be the first thing I need.

Thanks!
 

Attachments

  • cabaret.jpg
    cabaret.jpg
    28.5 KB · Views: 12
Last edited:
Awesome. Thank you. Apparently I suck at searching. Anyways, based on this post...
Okay here are the measurements that should help you figure out the angle...

Side piece closest to the front is 36 1/8"....middle of the side piece is 51 3/4"....back of the side piece is 41 3/4". From the front edge to the point plumb with the peak of the cabinet is 7 11/16" and from the back is comes 15 15/16". That should be the 5 points you need for plotting the angle. I know a few of them are a bit odd measurements but hopefully they work out. Also here are a few other measurements I grabbed.

And here is how I understand this post. Is this correct? Can anyone tell me the length of the piece across the bottom (the green line) and is the angle (pink in the pic) 90 degrees? I think with that info I can figure out everything else.

attachment.php
 

Attachments

  • ninty.JPG
    ninty.JPG
    51.6 KB · Views: 57
Awesome. Thank you. Apparently I suck at searching. Anyways, based on this post...


And here is how I understand this post. Is this correct? Can anyone tell me the length of the piece across the bottom (the green line) and is the angle (pink in the pic) 90 degrees? I think with that info I can figure out everything else.

attachment.php

Yep. Add the 7 11/16" to the 15 15/16" and whattaya get? Should be around 23 5/8". Yeah the back corner is a 90 degree angle, the front corner is slightly rounded.
 
Yep. Add the 7 11/16" to the 15 15/16" and whattaya get? Should be around 23 5/8". Yeah the back corner is a 90 degree angle, the front corner is slightly rounded.

Okay, I guess I didn't realize the 23 5/8" would be the same top to bottom. I guess just in the pic the bottom angles both look a bit obtuse (thank you middle school math for remembering that term). When you say the front corner is slightly rounded would it still be 90 degrees if the edges went to a straight corner instead of rounding off? Basically, are the front and back edges parallel to each other? That would make everything oh-so-much easier.
 
Okay, I guess I didn't realize the 23 5/8" would be the same top to bottom. I guess just in the pic the bottom angles both look a bit obtuse (thank you middle school math for remembering that term). When you say the front corner is slightly rounded would it still be 90 degrees if the edges went to a straight corner instead of rounding off? Basically, are the front and back edges parallel to each other? That would make everything oh-so-much easier.

Yes.

DSC00515.jpg

DSC00516.jpg

DSC00517.jpg
 
Back
Top Bottom