andrewb
Well-known member
Nintendo 4-way DCKU joystick (DK3, Punch out), refurbished - $65 shipped
I have one refurbished 4-way Nintendo joystick for sale.
This is a DCKU-14-11 4-way stick, as described on the Mike's Arcade site, used for DK3 and Punch Out. It has a 28mm molded ball (i.e., no set screw). See details here:
https://www.mikesarcade.com/arcade/njoysticks.html
Details:
- Stick has been fully disassembled and cleaned.
- All parts soaked to remove any rust, then tumble cleaned and polished.
- Stick has been reassembled, and lubed with fresh silicone grease. (Smoooooth.)
- Shaft has been drill sanded and polished.
- Shaft has original plastic sleeve (which has been cleaned, but kept original).
- Knob has been cleaned and polished.
- 4-way restrictor is original and in good condition.
- Includes black dust washer (shown in pic).
- All switches externally cleaned and tested.
$65 shipped in the US. Int'l shipping extra.
I have one refurbished 4-way Nintendo joystick for sale.
This is a DCKU-14-11 4-way stick, as described on the Mike's Arcade site, used for DK3 and Punch Out. It has a 28mm molded ball (i.e., no set screw). See details here:
https://www.mikesarcade.com/arcade/njoysticks.html
Details:
- Stick has been fully disassembled and cleaned.
- All parts soaked to remove any rust, then tumble cleaned and polished.
- Stick has been reassembled, and lubed with fresh silicone grease. (Smoooooth.)
- Shaft has been drill sanded and polished.
- Shaft has original plastic sleeve (which has been cleaned, but kept original).
- Knob has been cleaned and polished.
- 4-way restrictor is original and in good condition.
- Includes black dust washer (shown in pic).
- All switches externally cleaned and tested.
$65 shipped in the US. Int'l shipping extra.
Attachments
Last edited: