ninja gaiden

p1899m

New member
Joined
Jul 12, 2007
Messages
9,119
Reaction score
72
Location
Rocklin, California
Rating - 100%
33   0   0
Any interest in a tested working ninja gaiden board, marquee and joysticks? The marquee is cut to fit a taito cab. From what I found the sticks are the ones that came with the kit for this game. They have a button on the top of the stick. BTW this is not a jamma board it has a unique pin out. $70 shipped to the contiguous states. Or if you don't like the price feel free to make an offer.
Thanks
 
Could you show some pics of the pcb? I have a Ninja Gaiden pcb that is actually JAMMA and has TECMO printed on the pcb. Just curious to see what your board looks like. Didn't know there were 2 versions of this game.
 
It is a jamma board. I changed the listing. Must have been the badly hacked wiring in the cab I pulled this from that made me think otherwise.
 
And just so people know, you don't necessarily have to use/install the joysticks with the grab button on top. As long as your JAMMA control panel has 3 buttons or more, one of those buttons will function as the grab button. This would swap in nicely with a Double Dragon cab.
 
Back
Top Bottom