FS Parts: Nice Coinco coin door; coin box; Defender pot

[Smashville]

Williams Joust joysticks no.1 with control panel harness. $70 + actual shipping SOLD

Williams Joust joysticks no.2 with modded control panel harness and 4 button holders (2 contain buttons). Note that part of the base of the yellow joystick below was cut short, apparently to fit it into a non-standard CP. $35 + actual shipping. (SOLD)



Williams Defender long-stem potentiometer with bracket. $23 + actual shipping


Atari 8-way logo joysticks. Note that in the logo area, the one on the right has a bit of a matte texture. I am not sure if this is wear or if it was this way when it left the mold. I am no expert on these joysticks, but they seem to be in pretty good shape.

Left one: $65 (SOLD)
Right one: $60 (plus actual shipping) (SOLD)

 

[64B1T]

Pmed.

 

[firehawk618]

Good deal on the Joust stuff!

 

[rdudding]

PM sent.
—Rich

 

[Smashville]

Williams Joust joysticks no.1 with control panel harness. $75 + actual shipping View attachment 685624View attachment 685625View attachment 685626

Williams Joust joysticks no.2 with modded control panel harness and 4 button holders (2 contain buttons). Note that part of the base of the yellow joystick below was cut short, apparently to fit it into a non-standard CP. $35 + actual shipping. (SOLD)
View attachment 685627
View attachment 685628

Williams Defender long-stem potentiometer with bracket. $23 + actual shipping
View attachment 685630

Atari 8-way logo joysticks. Note that in the logo area, the one on the right has a bit of a matte texture. I am not sure if this is wear or if it was this way when it left the mold. I am no expert on these joysticks, but they seem to be in pretty good shape.

Left one: $65 (SOLD)
Right one: $60 (plus actual shipping) (SOLD)
View attachment 685631View attachment 685632View attachment 685633View attachment 685634

Some additional items:

Coinco 2802 coin door with mechs included. This is the Williams version and includes the original 3-button service switch panel/bracket. This door has been stripped, cleaned of all rust, and repainted with some splatter texture. It currently has orange Coinco reject buttons of the type that have no built in slot. I can probably replace these with red buttons that have the built-in slot (like some Robotrons) if you prefer. Otherwise as is. The upper left stud that holds the yellow zinc plate is broken off, but doesn't affect function. I don't have the key to the lock. $120 shipped in US.



Williams plastic coin box, clean, no lid. $20 plus shipping.

Lower coin door. $115 shipped. (SOLD)



Williams Defender joystick and control panel harness with all leaf switches for buttons. $55 plus actual shipping. (SOLD)




Williams Defender interface board untested. $27 plus shipping. SOLD

 

[Smashville]

Still have joysticks & control panel harness no.1, Defender potentiometer and widget board

 

[Smashville]

Coinco coin door (nice) added with coin box. Have an additional Defender control panel harness with joystick as well.

 

[Smashville]

This list is down to:
Coinco coin door,
coin box,
and Williams long-stem potentiometer.

Everything else has sold.

 

[Smashville]

Another Defender joystick with control panel harness including leaf switches for buttons. $55 SOLD

 

[Phetishboy]

I'll take it.

 

[Smashville]

Found one more Defender control panel harness with leaf switches and springs wired to the end of it plus a Defender joystick base that has another set of leaf switches and springs. Don't have the stick/shaft with this one. Switches and springs are in very good condition. $55 plus shipping. SOLD

 

[nulogix]

Found one more Defender control panel harness with leaf switches and springs wired to the end of it plus a Defender joystick base that has another set of leaf switches and springs. Don't have the stick/shaft with this one. Switches and springs are in very good condition. $55 plus shipping.
View attachment 688400
View attachment 688401View attachment 688402

Pm sent

 

[Smashville]

Last Defender base and harness sold. Still have Coinco coin door, coin box, potentiometer.

 

[phil13955]

I know this is a really old thread but I was wondering if you have a coinco 2802-37 available