Ni-Wumpf Flashing Help needed

clairvius

New member
Joined
Feb 18, 2012
Messages
84
Reaction score
0
Location
Port Barre, Louisiana
I have a system 80 Ni-Wumpf board that i need to re-flash from the Amazing Spiderman to Black Hole i have no idea how to start or what to do to get this done. Is there some type of tutorial out there and what is the best program to use. Hopefuly i can find a step by step dummy proof. Thanks for everyones help can't wait to get this pin up and working
 
well now that im not feeling stupid ill post what my proublem was. I was attempting to flash the board at my pc witch isnt by my pinball machine. SOOOOOOO ANYHOOOOO long story short the MPU has to be powered to be flashed i spliced a old J1 connector to a pc power supply and powered the +5 and grounds of the MPU and it flashed just as easy as the manual made it look. You or atleast i wouldn't of thought you had to flash these boards with the machine up and running well you learn something new every day thanks for the help everyone.
 
Back
Top Bottom