NFL Blitz 2000 / NBA Showtime Power Sup-12Vply Issue

Cheese

New member
Joined
Feb 14, 2010
Messages
1
Reaction score
0
Location
Garrettsville, Ohio
NFL Blitz 2000 / NBA Showtime Power Sup-12Vply Issue

I have a NFL Blitz / NBA Showtime 2000 currently not working. I hadn't turned the game on in about 2 months. I started the game yesterday and it is dead. The power supply is not working. I have puchased a new power supply but what voltage do I set the new power supply too? I do not have a manual and I cannot get the power supply to work so I don't know what voltage to set. The power supply runs +5/V @16A, +12V @6A, -5V@ 0.5A and -12V@ 0.5A. Can someone help me out?
 
did you mess with the +5V adjustment pot on the power supply yet? if not, good. every new power supply I've gotten was set to exactly 5.00V, but, you never know. 5.00 isn't high enough, particularly for a Sportstation. I didn't have to adjust the power supply in the Blitz 2000 cab I got that runs a Sportstation board now, but I think from what I've heard it's very picky about the +5 voltage, I think you need 5.10V at the JAMMA edge, or else it won't work right.

to make this work, you're gonna need a digital voltmeter. did you get like a Happ Power Pro with the molex connectors? cause a Blitz/Sportstation cab comes with that end, it's literally plug and play, and then I stick my meter probes into the back end of the molex on the red (+5) and black (ground) wires to set the +5 on the power supply. don't turn the adjustment knob too much, very gradually, otherwise you'll be shooting massive voltage through it. :)

if you have any problems or questions PM me, or maybe someone else will chime in. let me know what your replacement power supply is.
 
Back
Top Bottom