newest score...

punkshere2stay

Active member

Donor 2012
Joined
May 10, 2010
Messages
2,987
Reaction score
16
Location
fort worth, Texas
cl add for non working pole position pole position 2 and hang on...it was $100 each or $200 for all three.... all i had money for was the hang on... and i talked a friend of mine into buying the pole position's.. they are all in great shape.. the hang on looks wonderful. the pole positions look very good as well... no water damage at all on any of them. they all had the back doors... and he gave me a whole pole position in a box extra. and a few misc control panels for other games... here is what i got...


Hang On : opened up the back door... just took a quick look and i plug it in... here the monitor fire up but nothing more... turn it off.. start looking aroudn and i see some whire loose in the bottom with wire nuts on the ends... and i am looking and lookign and it hits me... the damn switcher is missing... i go into the garage and dig threw my box of my gutted afterburner parts and bam there she is...the switcher from afterburner.... toss it in to hang on put the wires on fire it up and WOOHOO she comes up and plays... missing the brake but i can come up with one of those.

IMG_20111216_213538.jpg


IMG_20111216_213546.jpg


IMG_20111216_215341.jpg
 
Last edited:
and pole position : haven't had a chance to realyl mess with them for my buddy but thats going to happen tomorrow



IMG_20111216_211508.jpg


IMG_20111216_211543.jpg


Pole position 2

IMG_20111216_211049.jpg


IMG_20111216_211147.jpg
 
Last edited:
Welcome to the Hang-On owners club :D

I think I have an extra brake handle if you need it, acually have a bunch of spare CP parts and a spare boardset for parts. Let me know if you need anything.
 
Welcome to the Hang-On owners club :D

I think I have an extra brake handle if you need it, acually have a bunch of spare CP parts and a spare boardset for parts. Let me know if you need anything.

brake is the only thing it is missing... missing the perch and the lever... my cable is fine....
 
By "perch" I'm guessing you are referring to the piece that mounts the lever to the handlebars? I have that assembly. PM me if you want it.
 
ok got to mess with the Po0le positions this morning... the pp1 cab the monitor has neck glow but make a sqeeking sceaching noise. so i went on to the pp2 cab.. it has a 20-ez in it!!! i plugged it in here the monitor fire up test the voltages on the AR2 all is good...shut it off plug in board set #1 this is what i get

IMG_20111218_085618.jpg


crap!!!

turn it off unplug re plug turn back on same thing... this board has some very light acid damage and hasn't been repaired in that area so got my fingers crossed that i can replace a few things in that area and have this set working..

so i plug in board set #2

turn it on i here a sound i get up and go look at the monitor and i see it running threw a few screen and then it come to the game over screen and starts the atract mode. im like F-N-A!!!! this is what i got

IMG_20111218_085947.jpg


the controls are all working need to clean and lube the switch on the gas but thats about it
 
Nice games. I just got a PP II last week. Didn't do anything at first but after a little tinkering was greeted with the start up sounds and a fully working game, well except for the monitor but worked great on a test one. I'm keeping the boards for use in my cockpit and the cab is going to a friend to replace a beat up one. It is in great condition but I don't have room for an UR and a CP so it worked out well.

PP is one of my favorite games and a working one is a great thing. The sounds and graphics are iconic.
 
Congrats Trey. You have been having some pretty amazing luck scoring driving type games.

ken
 
well the hang on is mine.....the Pole Positions are Joe's i got one of them working for him now i got to figure out the the other pcb...then he will have 2
 
Back
Top Bottom