Newbie with Rowe R-86

ledbetter

New member
Joined
Aug 4, 2009
Messages
4
Reaction score
0
Location
QLD, Australia
Hi guys i recently purchased a Rowe R-86
When I turn on the jukebox, the Transfer Motor starts immediately.
The gripper takes a record from the magazine and put it on the turntable (that doesn't start to turn).
The tone arm comes in place, and goes back again. The gripper takes the record and puts it back in the magazine.
This happens over and over again.
The CCC only shows the 8vcd light, same thing happens in service mode and i cant choose any selections or anything.
I have ordered the service manual and am awaiting its arrival.
Any help would be greatly appreciated.

Thank you in advance,
Clint.
 
Hi Clint,

If you are in the USA you need to send in your CCC to Bruce Wentworth for testing/repair, more than likely it will be the other chips in the CCC rather than the custom chip.

Regards
Alan Hood
ami-man
UK
 
Unfortunitly i am in Australia so i dont know if sending the CCC would be an option , i will go over all the header pins and resolder and re crimp the cables etc in the next few days and see it that makes any difference.
fingers crossed.
 
Back
Top Bottom