Newbie needs help with a 290/170-5 DCB

dkvarda

New member
Joined
Jun 4, 2010
Messages
2
Reaction score
0
Location
Arizona
I found one of these machines in a storage unit, picked it up for 50 bucks. Im looking for a wiring schematic. The one that was posted inside has flaked off. What is hapening is if I drop coins in, and select an item (push the button) nothing happens, But if I manually activate one of the dispensing motors it runs its cycle, and than awaits for the next set of coins.
It has a coin acceptor inc, I can only read part of the model number and it is starts with A910. The serial numbr is 167329. Im wondering what controls the activation of the push buttons after the money is deposited?

Does anyione know where I can get some documentaion on the acceptor or even the machine itself?

Please help....

I can send pictures if this will help

Thanks

David
 
I found one of these machines in a storage unit, picked it up for 50 bucks. Im looking for a wiring schematic. The one that was posted inside has flaked off. What is hapening is if I drop coins in, and select an item (push the button) nothing happens, But if I manually activate one of the dispensing motors it runs its cycle, and than awaits for the next set of coins.
It has a coin acceptor inc, I can only read part of the model number and it is starts with A910. The serial numbr is 167329. Im wondering what controls the activation of the push buttons after the money is deposited?

Does anyione know where I can get some documentaion on the acceptor or even the machine itself?

Please help....

I can send pictures if this will help

Thanks

David

find the relay on the inner door its most likely a little clear box with a bunch wires running to the bottom of it, that goes bad and can give your prob ,Ron
 
Back
Top Bottom