modessitt
Volunteer: Encyclopedia Submission Moderator
New thread for "_jmfr" - WG25K7197 question
Since I was probably most to blame for his thread getting derailed, I'll paste the relevant info here so he can get the help he needs:
Let anyone who wants to HELP, do so....
Since I was probably most to blame for his thread getting derailed, I'll paste the relevant info here so he can get the help he needs:
ok, im gonna go ahead and ask. im gonna refer to pg 20 in the manual for my questions. If you look on pg 20 towards the bottom, you'll see c40. Just below that you'll see an A & B where 2 blue wires run from. the B runs down the board just above R83. My question is, what does that wire solder to on the other side of the pcb? also, there is some resistor on the solder side of the pcb that came off, and i have no idea where it goes,but i know it's close to where the blue wire get soldered. hopefully this will help, and ill still post pics tommorow. Also, im gonna do a cap kit on this thing soon and plan on gettin the kit from bobroberts. can i get resistors from him too? i wanna replace the one that came off the backside.
Thanks,
Jason
If a part came off the /bottom/ of the chassis, you will need a photo of another one. Those are undocumented changes by WG that aren't in the manual.
where does the blue wire get soldered? does it get soldered to r83?
Let anyone who wants to HELP, do so....