POLL New Products

[security0001]

we have added on about 1000 new products in just the last 18 months such as wire, bulbs/lamps (the best quality Eiko bulbs), and many new kits and parts people have requested and we will have a ton of new products coming in April also. please let me know what other products you would like to see. remember it must fall into the same category of products we already offer so it compliments what type of products we already offer. REMEMBER if you haven't searched our site in a month or two you will be shocked how many new products/kits are added each month. This summer we will start winding coils again too.

https://www.arcadepartsandrepair.com/product-category/cabinet-parts/wire-stranded/

https://www.arcadepartsandrepair.com/product-category/cabinet-parts/lamps-bulbs/

https://www.arcadepartsandrepair.com/

 

[pinge80]

Awesome! You have almost anything I have needed in kits so far.

If you could add the Tantalum capacitors to the Midway Dual-Amp kit it would be Great... Or atleast I think (and hope) its because of them I still have a humming sound.

 

[security0001]

Awesome! You have almost anything I have needed in kits so far.

If you could add the Tantalum capacitors to the Midway Dual-Amp kit it would be Great... Or atleast I think (and hope) its because of them I still have a humming sound.

i have thought about adding them in several different audio kits and will start changing them in the spring.


Any other suggestions from anyone for new products or changes to existing??

 

[chilibear13]

19" K7000 width coil. Most of the ones I've come across are already frozen having no choice but to change the width cap.

 

[cysnake]

I had Bob Roberts make up a cap kit for the gold star monochrome monitors in galaxy top gun dart boards. Heres the list if you want to add it to your line up.

 

[jm1607]

I think its been brought up before. You may have done it? I haven't checked..

Some sort of fuse kit with 5 or so of all the most common fuses?

 

[security0001]

I had Bob Roberts make up a cap kit for the gold star monochrome monitors in galaxy top gun dart boards. Heres the list if you want to add it to your line up.

https://www.arcadepartsandrepair.co...-2105a-mc-3-13-monitor-cap-kit-105c-nichicon/

i have had that kit for a couple years already.

 

[PassivePac-Man]

Have you thought about offering a GO7 deluxe kit? It seems that, when people rebuild these, it's pretty much standard to replace caps, hot, flyback, and a couple other parts that commonly fail. Pretty sure you already offer everything for the GO7, and it might be easier for buyers if it was offered altogether

EDIT: wanted to clarify that I am referring to the CBO, the others probably aren't common enough

 

[Scott C]

Have you thought about offering a GO7 deluxe kit? It seems that, when people rebuild these, it's pretty much standard to replace caps, hot, flyback, and a couple other parts that commonly fail. Pretty sure you already offer everything for the GO7, and it might be easier for buyers if it was offered altogether

EDIT: wanted to clarify that I am referring to the CBO, the others probably aren't common enough

G07-FBO is pretty common too.

Scott C.

 

[whitefox]

Things and stuff. Need more doo-hickeys, widgets, thingamabobs. How about somethingorothers and a few demderthingies (german imports hard to find).

 

[security0001]

Have you thought about offering a GO7 deluxe kit? It seems that, when people rebuild these, it's pretty much standard to replace caps, hot, flyback, and a couple other parts that commonly fail. Pretty sure you already offer everything for the GO7, and it might be easier for buyers if it was offered altogether

EDIT: wanted to clarify that I am referring to the CBO, the others probably aren't common enough

yes i have thought about doing that kit but i don't recommend replacing the HOT and VR unless they are truly bad on the G07. i think there are more important parts to include in a kit like that and that is on my plate. i want a kit that is practical based on parts that should be replaced not just a bag of parts with no thought into that kit and have people replacing tons of good parts that shouldn't be replaced when they are good.

 

[smalltownguy2]

We need a drop-in K4600 width coil replacement.

 

[Charles Kline]

+1 on the GO7 kit with a bit of a discount over buying the caps and fly separate.

 

[norCal4Life]

This! Would be nice to have fuse kits by game at reasonable price.

I think its been brought up before. You may have done it? I haven't checked..

Some sort of fuse kit with 5 or so of all the most common fuses?

 

[seanengadet]

we have added on about 1000 new products in just the last 18 months such as wire, bulbs/lamps (the best quality Eiko bulbs), and many new kits and parts people have requested and we will have a ton of new products coming in April also. please let me know what other products you would like to see. remember it must fall into the same category of products we already offer so it compliments what type of products we already offer. REMEMBER if you haven't searched our site in a month or two you will be shocked how many new products/kits are added each month. This summer we will start winding coils again too.

https://www.arcadepartsandrepair.com/product-category/cabinet-parts/wire-stranded/

https://www.arcadepartsandrepair.com/product-category/cabinet-parts/lamps-bulbs/

https://www.arcadepartsandrepair.com/

A Canadian warehouse would be superior.

Sooooooo many more folks up here would order if it wasn't for the shipping.

 

[behrmr]

yes i have thought about doing that kit but i don't recommend replacing the HOT and VR unless they are truly bad on the G07. i think there are more important parts to include in a kit like that and that is on my plate. i want a kit that is practical based on parts that should be replaced not just a bag of parts with no thought into that kit and have people replacing tons of good parts that shouldn't be replaced when they are good.

So many G07's die horrible deaths I think that this kit would be beneficial.
HOT, VR, Flyback, Caps, Filter cap, fuses and clips, C402 tantalum cap, FR401, R908 then width coil and pot kit optional.

With 4600's the C621 cap should be included in all kits. That paper cap seems to be failing on all of them (must be an age thing vs usage).

 

[security0001]

We need a drop-in K4600 width coil replacement.

i am hoping to wind more of them later this summer.

 

[KenLayton]

19" K7000 width coil. Most of the ones I've come across are already frozen having no choice but to change the width cap.

Yes, width coils for sure. Especially the K4600 one.

 

[joeycuda]

i am hoping to wind more of them later this summer.

I never realized you had any! I'd buy some.

I agree w previous post about all in 1 G07 kit.

 

[demogo]

Moonpies. Gotta have 'em.

Also that's great that you're now selling stranded wire.