New Flyback, now monitor just beeps

Mario64

Member
Joined
Aug 1, 2016
Messages
344
Reaction score
22
Location
Texas
Hello everyone, I am back with more problems from my second SF Rush monitor. So I just replaced the flyback on my Neotec 27e because the previous one would last for about 30 min before the picture would start to get dim, so dim that is was unplayable.

First time doing a flyback repair, so I purchased the MRCFT 252 from Twisted Quarter, do you think I should have got the 249?, with that being said once I installed and plugged every thing back up and fired it up I got no picture, no static noise and no neck glow and after about 10 seconds of the game playing blind, my monitor or chassis started to beep. Now it just beeps every time I power it on.

I have read that the HOT could have blown but if that is the case does that mean the flyback is the wrong one?

Any input is greatly appreciated.
 
Last edited:
the 252 can sub or the 249 and the 252 is the correct flyback for the 27e. did you put a cap kit into it? did you reflow solder on all header pins, larger wattage resistors, etc?? if you have HV than your hot should be good but i would start with those things first and next maybe you got a bad flyback or another component is bad.
 
Back
Top Bottom