new connector for video

Milhouse2021

Active member

Donor 3 years: 2021, 2024-2025 (Monthly Donor)
Joined
Aug 23, 2021
Messages
158
Reaction score
55
Location
Lunenburg, Massachusetts
Hey All!

Avengers arcade is giving me issues; I am going to replace the connector. I cannot for the life of me get one that fits. I need a 6pin (but only 5 will be used)

any thoughts on which one it is?

I think it is .156; but i have that it won't fit the molex connectors
 

Attachments

  • video1.jpg
    video1.jpg
    137.2 KB · Views: 10
  • video.jpg
    video.jpg
    149 KB · Views: 10
yes that looks like the molex .156 and if its not fitting then we would need to see the header pins. we stock everything depending on what you need.
 
yeah I had the wrong molex connector for wire size!
yeah that will cause a very bad crimp if you use 22awg wire in pins designed for 18-20 awg and the wire will pull out without much effort.
 
yeah that will cause a very bad crimp if you use 22awg wire in pins designed for 18-20 awg and the wire will pull out without much effort.
I've seen people crimp using both points on the pins on just the exposed wire. no insulator. the weird irony is they used to put on wiring classes.

but... in a pinch, that's what you could do here. lol
 
Back
Top Bottom