You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Museum of the Game® & International Arcade Museum® Forums
Hey Guys,
I bought a couple of the new "G" model amp flybacks for some amazing arcading (Dezbez) reproduction HV boards.
The nice thing about this model is it has a built in heater winding and gets rid of the wire wraps around the core like the "F" model.
The heater comes out on a gray wire and gets connected into the "HTR WHT" hole on the HV PCB. If you have an original amplifone focus block then the small red wire from the flyback goes to that. If you are using the 6100 focus block, then you have to cut and cap the small red wire and cut and splice the new anode lead into the top of the 6100 block. The 6100 focus block has a shorter anode lead but still reached the tube in my UR Star Wars cab with some extra. I am not sure on the cockpit.
Here are some photos of the finished board with new flyback and a 6100 focus block.