Neotec NT-2701 doesn't have a cap at c424??

woodsy169

Member
Joined
Nov 29, 2009
Messages
198
Reaction score
1
Location
Ada, Oklahoma
Greetings, my NT-2701 recently took a dump and burned resistor R431. According to some other posts, this is because cap c424 failed...well, my board doesn't have a c424, but does have a c423 which is a large brown/maroon colored cap. Could the c423 be the culprit? Of course there wasn't a replacement c423 in my cap kit, so it didn't get replaced. Any ideas?
 
I've got a 2701 right in front of me now with C424 populated.

I've talked with others that describe some chassis having it and some not, seems to be related to revision level, but I don't have any information on differences in revisions.

I can't add anything to your fried resistor question, other than to say of C424 isn't populated, and does not appear to have ever been populated, leave it that way.

D
 
To further confuse matters, I've found out that Neotec has occasionally put the wrong model number labels on some monitors!
 
Back
Top Bottom