Neotec NT 2501 New Issue

mrv8outboard

Member

Donor 2020
Joined
Apr 29, 2019
Messages
55
Reaction score
8
Location
North Falmouth, Massachusetts
I have done a cap kit and flyback. Voltage is set to 125. Before I go twisting and turning a bunch of pots on the board what should I be looking
at for the issue in the photo? Monitor was functioning before but focus and brightness issues and age on original caps. Thank you.
 

Attachments

  • IMG_20250222_220440.jpg
    IMG_20250222_220440.jpg
    374.5 KB · Views: 6
  • IMG_20250222_220545.jpg
    IMG_20250222_220545.jpg
    422.3 KB · Views: 6
I have tried adjusting the pots on the remote board and the H position and H frequency pots on the chassis to no avail. Recommendations?
 

Attachments

  • IMG_20250223_161115.jpg
    IMG_20250223_161115.jpg
    622.6 KB · Views: 1
  • IMG_20250223_161034.jpg
    IMG_20250223_161034.jpg
    355.7 KB · Views: 1
try another signal source / game for sure .. could be
 
Hi,

Okay so I connected the monitor to the game and adjusted it. I had picture (now no blue on the game) but stable picture. Hooked it back up to my TPG2 and the picture was not right.
Then swapped back over to the game and it was okay (no blue). Am I doing something wrong with the TPG2? Set to medium res -H. Or is normal for them to be that different?
 

Attachments

  • IMG_20250225_211824.jpg
    IMG_20250225_211824.jpg
    671.7 KB · Views: 2
  • IMG_20250225_212444.jpg
    IMG_20250225_212444.jpg
    787 KB · Views: 2
Back
Top Bottom