Neotec 27E (sf rush) adjustments

p1899m

New member
Joined
Jul 12, 2007
Messages
9,119
Reaction score
72
Location
Rocklin, California
Are there any other adjustments for this monitor other than on the satellite board inside the coin door? my monitor looks blurry and I can see the raster retrace lines and can't adjust them out. I'm not seeing the screen and focus knobs that I usually see near the flyback on most chassis.
 
Its there on the right hand side of the monitor behind the metal plate. (Looking from the back) There are 2 or one oval shaped openings to get a small screw driver in to adjust with. You'll most likely need a mirror and flashlight to see them.
 
Its there on the right hand side of the monitor behind the metal plate. (Looking from the back) There are 2 or one oval shaped openings to get a small screw driver in to adjust with. You'll most likely need a mirror and flashlight to see them.

thank you. I looked around in there with a flashlight but didn't see them. Sounds like they're recessed and possibly a bit hard to see.
 
Yes they are recessed. You will definitely need a small mirror and flashlight to find them.

Whenever I have these monitors out of the machine for servicing, I use a nibbler to carve out that oval hole to make it easier to get to those adjustments.
 
Are there any other adjustments for this monitor other than on the satellite board inside the coin door? my monitor looks blurry and I can see the raster retrace lines and can't adjust them out. I'm not seeing the screen and focus knobs that I usually see near the flyback on most chassis.

FYI - those monitors are infamous for having shitty flybacks. The odd part is that the edges tend to get fuzzy and not the whole picture. If you have fuzzy edges I'd bet on the flyback being the culprit.
 
FYI - those monitors are infamous for having shitty flybacks. The odd part is that the edges tend to get fuzzy and not the whole picture. If you have fuzzy edges I'd bet on the flyback being the culprit.


Yup. Fuzzy edges. One of my cruis'n worlds is like that with its NT-25E. Trying to find a flyback for it.

Oh, and the Rush 27E had the same issues lol.
 
Back
Top Bottom