neotec 2515c caps verified

security0001

Well-known member

Donor 6 years: 2020-2025
Joined
Jan 10, 2011
Messages
9,349
Reaction score
2,811
Location
Montana
i have a neotec 2515c cap kit i have sold for a couple years now and i made it off the manuals/schematics and no one has said anything about the kit, BUT i just recapped a 1997 model year neotec 2515c of my own that was original with all the caps glued down still. when i was capping my own chassis there was two caps in question on the neck board (which are original on my chassis) and they were C920 and C924. BTW: i compared to many other kits from other vendors and they don't even show C924 nor does the schematics/manual and my original kit and everyone elses had C920 as a 10uf 250v BUT my chassis i just capped had C920 and C924 as a 22uf 250v. has anyone come across this with this chassis and from what i can tell on the schematics increasing the C920 to a 22uf would be completely acceptable. i am wondering if this is very common or maybe a end of run change that wasn't documented.
 
Back
Top Bottom