Neo Geo SNK Single Slot - Mon Chassis blown

wrkey

Member
Joined
Dec 13, 2009
Messages
215
Reaction score
3
Location
Spring, Texas
Recently picked this game up and last night pulled it out of storage so I could get her working. I couldn't get the monitor to light up and replaced the blown fuse but had no success so I pulled the monitor. The chassis is very sick. So much so that I think I just need to buy a different one. One cap was completely blown to pieces, at least 3 others in various locations around the board are also bulging where they shouldn't be. There are least 8 resistors that have been burned with at least three of them to the point where you can see their innards. Even the neck board has 3 blown out resistors.

So the question becomes... did the monitor cause all of this and I need to replace it all? Or can I get a different chassis and hope for the best (better than 80% chance of it working)?

It has RCA A63ADT10X05 on the tube. The Chassis has Eygo Model 1826HR 25" Monitor. I see in other post this may also be a Hantarex monitor but I have no idea.

Here's what I'm looking for... first choice - replacement chassis, second choice - replacement monitor, third choice - schematic to help me rebuild current blown chassis.

Can anyone help me?
 
They Eygo 1826HR I believe you can still buy, that's what the Wei-Ya chassis are. Try searching for Wei-Ya 1826 and see if one pops up. I think they're about $80.
 
Back
Top Bottom