I will start by saying this is my first full on restoration. When I bought the cab, the back and bottom was very water damaged. The bottom 3" and most of the back was swollen to over 1"! So I started by sanding, Bondo and cut all new pieces for the back. The wood on the left of the monitor also had a chunk taken out. I Bondoed that up and routed a t-molding channel. The EL panels were out so I wired in a fluorescent.
Heres my rundown.
Painted the red
Black vinyl from thisoldgame.com
side art and player arrows from member darthphunk
t-molding from quarterarcade
New CPO from quarterarcade (very nice btw)
new buttons and joysticks
cleaned and capped the monitor
painted all metal pieces
painted pcb cage and service panel
Heres my rundown.
Painted the red
Black vinyl from thisoldgame.com
side art and player arrows from member darthphunk
t-molding from quarterarcade
New CPO from quarterarcade (very nice btw)
new buttons and joysticks
cleaned and capped the monitor
painted all metal pieces
painted pcb cage and service panel

