Neo Geo MV-IC Memory Card Reader

D_Harris

Well-known member
Joined
Jan 27, 2008
Messages
2,518
Reaction score
51
Location
Staten Island, New York
I have a Neo Geo MV-IC Memory Card Reader I'm selling a someone who wants it thinks that this can be used with a 4-slot motherboard.

I know little about NEO GEO PCBs but was under the impression that the card reader only works with an MV-1C motherboard.

Can someone confirm the specifics?

Thanks.

Darren Harris
Staten Island, New York.
 
DOH!!!!!

Nope... That card reader has 2 large ribbon cables that connect it to the game board. It works with the 4 slot/6 slot boards and with the older, larger 1 slot boards, not the 1C board.

The 2 slot boards have a built in card slot so they won't use it.

It will work fine with their 4 slot board. Does it come with the headphone cables and the big ribbon cables? If not, let the buyer know.
 
He knows there are no cables.

But just to be sure. The below is what I have. And you are saying it would work with an MV-4F & MV-4FS?

(The motherboards I still have are the MV-1 and the MV-2F).

Edit: Ok. This card reader will work with the MV-1(1-slot) I have. The MV-2(2-slot) motherboard I have already has the memory card reader built into it. (The card reader will also work with any 4-slot or 6-slot motherboard).

*** Lastly, are the cables that go with these card readers standard enough to be easily purchased on the internet?


Thanks.

Darren Harris
Staten Island, New York.
 

Attachments

  • MV-1C SNK.JPG
    MV-1C SNK.JPG
    65.3 KB · Views: 17
Last edited:
Back
Top Bottom