Neo Geo Help

Suchibu

Member

Donor 2012
Joined
Dec 30, 2012
Messages
111
Reaction score
1
Location
Illinois
Can someone please tell me what the heck Sub1 and Sub2 are on the Mvf2 neo board? They look like control hook ups. The manual does not say what they are used for. From what I can tell the buttons and joysticks get connected using a jamma style harness.
 
... so I don't have a board in front of me to double check the label for you but many Neo Geo boards have 15 pin joystick ports for a AES type controller to be plugged into it. The joystick are double wired up in this case.The housings are plastic ports.

Hardmvs has a feature chart listing for all of the boards and both 2slot boards have joystick ports. This is also how MVS boards ofthen get consolized.
 
Great, thank you. I just picked up Neo Geo parts and going to build a cab. The only mistake I have made was listing to the "Neo Geo Song" :) can't get it out of my head.
 
two slots are not straight jamma so double check your wiring esp for the sound section.

I would suggest you do the sound section caps and a keystone battery mod.
 
Someone has already done a re-cap on the board (looks like garbage). I'm on the hunt for a neo geo cabinet harness. I have the pin out and an extra jamma harness to convert.
 
I may have an extra MVS control panel harness. Will need to double check. Pretty sure it came from an MVS cabinet for the multislots. I also have the credit counters and i am positive they work.

Basically bought a whole separate control panel to try to get an overlay off of, but it didn't work out :)
 
I have a control panel but need the wiring from the board to the pannel. Thanks for looking.
 
Back
Top Bottom