FS Parts: Neo-Geo CP & Harness, Parts from Crazy Taxi Coin Box & Skee-Ball parts

keithsarcade

Well-known member
Joined
Nov 27, 2008
Messages
8,875
Reaction score
160
Location
St Peters, Missouri
Rating - 100%
232   0   0
Neo-Geo CP & Harness, Parts from Crazy Taxi Coin Box, G07 Chassis, Lost World PCB/PS

Ok, my basement's getting full again, time to clear out some parts...

G07-CBO monitor chassis. This one is working except it needs a width coil. It also has a crack in the corner of the neckboard and it looks like someone "repaired" it with silicone. Includes yoke if you need it. $40 shipped USA

Crazy Taxi coin box (the box that mounts to the side of a sit-down cabinet) - parting this one out. It is complete minus the service panel and some of the trim pieces have been removed from the top door since this photo was taken. I do have the working harness that goes between this and the cabinet, and this does have all the metal pieces, plates and what not. One side of the wood is ok but the other side is trashed. Just let me know if you need anything and we will go from there.

Over/under coin door. This one was removed from a RoadBlasters and has the wiring. It is complete minus coin mechs. No dents but could use paint. $50 shipped USA.

Jurrasic Park Lost World PCB set with case, power supply & video scanner. These were removed from an environmental game with bad guns, among other things, but all these items were in working order before I removed them. Otherwise I have no clue with this set, Not sure if it will work in a standard upright so do your homework. Selling the whole lot AS-IS, $100 shipped USA.

As always, will consider trades for anything on my wanted list (linked below).

Let's move this stuff.
 

Attachments

  • ctaxicb.jpg
    ctaxicb.jpg
    101.1 KB · Views: 57
  • g07cbo.jpg
    g07cbo.jpg
    103.5 KB · Views: 38
  • lw1.jpg
    lw1.jpg
    97.9 KB · Views: 17
  • lw3.jpg
    lw3.jpg
    101.7 KB · Views: 21
Last edited:
Back
Top Bottom