Neo Geo Big Red Help

jukeboxhero

New member
Joined
Feb 7, 2023
Messages
20
Reaction score
0
Location
boston, Texas
Hey guys just wondering if anyone makes/ sells stencils of the side and front art for screen printing/ painting. All I can seem to find are poorly don't vinyl stickers and they just won't do for me and my restoration can.

Also looking for a good source that's not szabos arcade for the memory card slot sticker.

Lastly am I wrong or did the 4 slot version 3 big red not have the red serial info sticker on the front that the 2 slots had.


Thanks guys
 
can't say i'm aware of any vendors selling the stencils for the proper logos/graphics. are they completely missing altogether from yours?

and regarding the serial tag on the 4-slot Rev3 cabs, i got the same 4-slot model and have no serial tag (although mine cab's anything but perfect), and i'm not seeing any of them in the images here for the corresponding model ... http://www.hardmvs.fr/xml/usa/usCabs.php

good luck!
 
Yah my vinyl was in rough shape and needed Bondo work so I dumbly stripped everything down before measuring.

Any chance you could measure and let me know the dimensions of the letters so I know how big to have the print shop make the stencil? Also any chance you can scan in the front art. ( Not sure how but then again I'm a dinkus)
 
Yah my vinyl was in rough shape and needed Bondo work so I dumbly stripped everything down before measuring.

Any chance you could measure and let me know the dimensions of the letters so I know how big to have the print shop make the stencil? Also any chance you can scan in the front art. ( Not sure how but then again I'm a dinkus)

I hope this helps. Good luck with the restoration!
 

Attachments

  • IMG_8133_Original.jpeg
    IMG_8133_Original.jpeg
    344.9 KB · Views: 7
  • IMG_8132_Original.jpeg
    IMG_8132_Original.jpeg
    444.1 KB · Views: 7
  • IMG_8130_Original.jpeg
    IMG_8130_Original.jpeg
    468.7 KB · Views: 5
  • IMG_8131_Original.jpeg
    IMG_8131_Original.jpeg
    469.2 KB · Views: 6
  • IMG_8134_Original.jpeg
    IMG_8134_Original.jpeg
    336.2 KB · Views: 7
Mine was missing the headphone decal, but I figured i'd just line that up with the slot. I did not grab any measurements from the front before the restoration but i did take some photos. Obviously the SNK decal was custom but here's a couple to help guide you. Don't get too caught up in the details, I'm sure even the factory stencils got off a hair here or there.
 

Attachments

  • IMG_0850.jpg
    IMG_0850.jpg
    198.8 KB · Views: 8
  • IMG_8175.jpg
    IMG_8175.jpg
    344.1 KB · Views: 8
Next Problem lol
For the life of me I cant seem to find a coincell holder that fits a mv4. Every one I try even with the legs bent just doesnt come close. Is using bodge wires to connect it a valid idea?
 
Back
Top Bottom