FS Parts: Neo Geo Artwork For Sale

[Pixel8Arcade]

PM ME YOUR ORDER
PLEASE DON'T ORDER IN COMMENTS

Okay, when you private message me what you want please include your name and shipping address and your email would be nice too for fast communication.

SHIPPING
Shipping is $20USD to anywhere in North America.
Shipping is $25USD to anywhere else.
Your order will arrive carefully rolled in a shipping tube or (smaller orders) will be protected with cardboard and shipped in a bubble envelope.

PAYMENTS
1. Through Paypal using US currency option and sent as "money to friends and family" aka gift mode.
2. Through Paypal using US currency option and add 5% if sent as "pay for goods and services" to offset service fee.
3. Will be made just before all orders go to print. Don't pay now.
4. If you don't have a Paypal Account maybe we can work something out.

Neo Geo Artwork I have available is...

Side Art (6 pieces) - $69.99USD - CHECK POST #2
(Large) Headphone Memory Sticker - $25.99USD - CHECK POST #3
Serial Number Decal - $22.99USD - CHECK POST #4
Cartridge Cover Artwork - $11.99USD - CHECK POST #5
(Small) Headphone Memory Sticker - $17.99USD *NEW - CHECK POST #31
(Short) Left Player Arrow - $17.99USD *NEW - CHECK POST #32
(Short) Right Player Arrow - $17.99USD *NEW - CHECK POST #33
(Long) Left Player Arrow - $19.99USD *NEW -
(Long) Right Player Arrow - $19.99USD *NEW -
(Bent) Left Player Arrow - WORKING ON IT
(Bent) Right Player Arrow - WORKING ON IT

See pictures and full descriptions below. READ CAREFULLY!

 

[Pixel8Arcade]

Side Art

Side Art - $69.99USD (6 pieces)

Printed on very thin vinyl.

The picture below is my 2 slot.

It should be noted the ® after NEO GEO and MVS is very small and the printer can't cut it properly so it will be filled in with a tiny bit of red ink...best fix we have.

 

[Pixel8Arcade]

(Large) Headphone Memory Sticker

(Large) Headphone Memory Sticker - $25.99USD

This decal has been updated since the first print run. Notice the little black circles inside the headphone symbols are gone as is the black rectangle under "memory card". This was done in case the decal did not fit PERFECTLY on your faceplate.

You will need an Exacto knife to cut the holes for the bolts, headphone jacks and memory card slot. Attach decal first, THEN CUT CAREFULLY FROM THE BACKSIDE.

 

[Pixel8Arcade]

Serial Number Decal

Serial Number Decal - $22.99USD

This decal has been updated since the first print run. ALL TEXT IS NOW SILVER! Not easy to print silver properly, but we did it. And the 6 lines of text at the bottom is sized better. Check out the new pic I attached.

I will need you to tell me which serial number you wish to have printed AND whether you have a 1,2,4 or 6 slot machine. Look at the picture below carefully and you'll see it makes a difference in the Model # area.

If you don't know your actual serial number just make one up.

 

[Pixel8Arcade]

Cartridge Cover Artwork

Cartridge Cover Artwork - $11.99USD

This is an extra piece of the MVS side art you can place inside the cab on the cartridge cover plate. It is 3" tall by 9 1/4" wide. You may have to measure on a 4 slot and 6 slot to ensure it will fit. I think it'll work for a 4 slot...not sure about the 6ers out there.

You'll also get numbers 1, 1-2, 1-4 or 1-6 (in Neo Geo font) so lemme know how many slots you have. Plus you get corresponding small arrows for your slots.

The picture below is my 2 slot. Fits nicely!

 

[oldfandude]

I don't need them but they look fantastic!

 

[Malenko]

any chance of getting the print SOONER rather than later? And it full sides, or just the letter on the side art?

 

[Pixel8Arcade]

@Oldfandude

Thanks. Trying to get all aspects of this art perfect was not easy.

@Malenko

With Christmas fast approaching I don't have time to be doing one off prints. Plus my printing company is a bit of a drive to get to, thus I'm doing a bulk order system. Sorry.

The side art is NOT the entire side of the cabinet ala Food Fight. It is 6 pieces of the white lettering only (3 for the left, 3 for the right) using thin vinyl to give it a stencilled appearance. I highly recommend you prime and paint your cabinet a couple weeks before applying the art.

I used a paint code called "Old Glory" by Benjamin Moore Paints which was the closest match to Neo Geo red I could find.

 

[ultra7350]

Any chance on making the front decal "left player and right player" arrows that goes above the coin door?
This guy used to make them but not anymore.http://www.thesupergun.com/tech-manuals/neo-geo-side-art-decals/

 

[Pixel8Arcade]

Any chance on making the front decal "left player and right player" arrows that goes above the coin door?
This guy used to make them but not anymore.http://www.thesupergun.com/tech-manuals/neo-geo-side-art-decals/

My machine didn't come with those big player arrows so I didn't think of doing them.

I will look into it though.

 

[Homicidal]

you making these in the size for mini?

 

[Pixel8Arcade]

you making these in the size for mini?

I might be able to do it for the mini cabs.....but I would need to know the height and length of all 3 pieces of side art. And my print girl would need these in millimetres (metric).

Is the serial # decal smaller on the mini cab? And does the mini have a headphone plate? Sorry, I'm unfamiliar with the smaller Neo Geo.....would love to own one though.

Prices would be the same.

 

[KalessinDB]

Second the request for Right Player Left Player decals, but be warned there are several kinds (just like there's two kinds of headphone/memory card decals)

Would be happy to photograph/measure mine (4 slot cabinet) if it helps. They exist on mine, just are faded.

Very happy to see someone taking up the mantle on making these, BTW.

 

[Pixel8Arcade]

PM sent about the left right player decal.

 

[CossackWarrior]

Id be in for a complete set plus the left and right player decals as well. Doing a restore right now, so these would be perfect. Also for the 4 slot big red.

 

[Pixel8Arcade]

We'll see if the poster above sends me good pics of the left right player arrows with measurements. From there I can get on making them.

Hope your restore is going good.

 

[CossackWarrior]

If he cant get the measurements, I will take pics and measurements off my Neo Geo. Let me know.

 

[Pixel8Arcade]

Bumpity

Quick bump.

About a week left before I send all the orders to print.

Thanks

 

[Pixel8Arcade]

First print run is all finished...thanks to all that ordered.

If you want something in the next week it can be done because I'm doing some work with my printing company in regards to another project machine.

Anyway, I'll accept orders from now until Jan 23 and then ship immediately.

Otherwise, the second run is open and orders can be submitted up until March 15, 2016.

Check out the products at the start of the thread because some have been revised and new pics attached.

Rock on Neo Geo owners!

 

[Enmity]

I can get you measurements for a Mini just so you have them. Depending on how things go with my project I might be interested in a set for a mini later anyways.